When to Replace the Needle on Your Model Three Professional Kit
The needle on your Coravin Model Three Professional Kit is the part that pierces the cork and delivers wine without removing it. Over time, the needle tip can dull or accumulate residue, which may affect pouring performance or cork integrity. Replacing the needle is a straightforward process that keeps your system working as intended.
Coravin recommends replacing the needle after every 30-40 uses, or sooner if you notice resistance when piercing the cork, drips from the needle after a pour, or a change in pour speed. The Model Three Professional Kit includes a Fast Pour Needle, which is designed for quicker pours but still requires periodic replacement.
How to Replace the Needle on the Model Three Professional Kit
Follow these steps to safely remove the old needle and install a new one. The process is the same for the Fast Pour Needle included with the Professional Kit.
- Remove the old needle: Make sure the system is not pressurized. Remove the capsule and then unscrew the capsule cup. Grasp the needle hub (the metal base where the needle meets the system) and pull it straight out. Do not twist or bend the needle.
- Inspect the needle seat: Before inserting the new needle, check the rubber seal inside the needle housing. If it appears cracked or worn, replace it as well. A damaged seal can cause gas leaks or poor pouring.
- Insert the new needle: Take the new needle and align the hub with the opening. Push it in firmly until it clicks into place. You should feel a slight resistance as the needle seats into the seal.
- Reassemble the system: Screw the capsule cup back on, insert a new Coravin Pure Professional Capsule (or standard capsule), and prime the system by pressing the pour button briefly. Check for any gas leaks by listening for hissing sounds. If you hear a leak, re-seat the needle or check the seal.
Compatibility and Needle Options for the Model Three Professional Kit
The Model Three Professional Kit comes with a Fast Pour Needle, which allows you to pour a glass in about half the time of a standard needle. This needle is designed for the longer capsule cup that accommodates the Coravin Pure Professional Capsules. When replacing, you can use either the Fast Pour Needle or the standard needle, depending on your preference.
The Professional Kit also includes 12 Coravin Pure Professional Capsules, which contain 30% more argon than standard capsules, allowing up to 20 five-ounce pours per capsule. The needle replacement process is identical regardless of which capsule type you use.
Model Three Professional Kit Needle Facts
- Model Three Professional Kit: The Model Three Professional Kit includes the Timeless Three Pro System, which features a longer capsule cup to accommodate the larger Coravin Pure Professional Capsules. The longer capsule cup means the needle assembly is slightly different from standard Coravin systems. When replacing the needle, ensure you use a needle designed for the Timeless Three Pro or confirm compatibility with the Fast Pour Needle included.

Model Three Professional Kit - Model Three Professional Kit: The kit includes 12 Coravin Pure Professional Capsules, each capable of pouring up to 20 five-ounce (150 ml) glasses of wine. With more pours per capsule, you may replace the needle less frequently than with standard capsules, but the needle still needs periodic replacement based on usage, not capsule count.
Tips for Needle Longevity
To extend the life of your needle, always clean it after each use by running a small amount of warm water through the system. Avoid using the needle on bottles with heavy sediment or debris, as this can clog the needle. Store the system with the needle cover in place to protect the tip.
If you notice that the needle is bending or showing signs of wear, replace it immediately. A damaged needle can damage the cork or cause wine to leak during pouring.

