How to Set Up Your Coravin Model Three Professional Kit

By Coravin Wine By-the-Glass Systems and Accessories | US | Published: 2026-10-18

Category: How-to Guides

Unbox and set up your Coravin Model Three Professional Kit step by step. Learn how to load the capsule, prime the system, and pour your first glass without removing the cork.

Quick answer

Unbox the Model Three Professional Kit, load a Coravin Pure Professional Capsule, prime the system by pressing the trigger until argon flows, then insert the needle through the cork and pour your wine by tilting the bottle.

What's in the box and why it matters

The Model Three Professional Kit includes the Timeless Three Pro System, a longer capsule cup, and Coravin Pure Professional Capsules that hold 30% more argon than standard capsules. This extra capacity means you can pour more glasses before swapping capsules, which is especially useful if you entertain often or pour multiple wines in one session.

Common first-time setup mistakes

A frequent error is not fully seating the capsule into the capsule cup, which prevents the system from pressurizing. Another is forgetting to prime the system before inserting the needle into the cork. Skipping the prime step can push air into the bottle instead of argon, defeating preservation. Finally, avoid tilting the bottle before the needle is fully inserted — this can cause wine to leak around the needle.

Step-by-step setup guide

Unbox and inspect the components: Remove the Timeless Three Pro System, the longer capsule cup, and the Coravin Pure Professional Capsules from the box. Check that the needle is clean and the silicone cap is in place on the bottom of the system. Do not touch the needle tip — oils from your skin can clog it.
Load the argon capsule: Insert a Coravin Pure Professional Capsule into the capsule cup with the small end facing down. Screw the capsule cup onto the system until it is hand-tight. You will hear a hiss as the capsule is pierced — this is normal. If you hear a continuous hiss, the capsule is not seated correctly. Remove and reinsert it.
Prime the system: Hold the system upright over a sink or cloth. Press the trigger firmly until you hear a short burst of gas. Release and press again once or twice until you see a faint mist of argon. This clears air from the needle. Skipping this step can introduce oxygen into your wine bottle.
Position the bottle and insert the needle: Place the wine bottle on a flat surface. Remove the foil capsule if present. Center the Coravin system over the cork and push the needle straight down through the center of the cork until the silicone cap rests on top of the cork. Do not wiggle the needle — it can damage the cork and cause leaks.
Pour your first glass: Tilt the bottle to a 45-degree angle with the spout over a glass. Press and hold the trigger. Wine will flow until you release the trigger. When finished, return the bottle upright and release the trigger. Wait 2 seconds, then remove the needle by pulling straight up. If wine drips after removal, wipe the needle with a clean cloth — a drop is normal, but a steady drip means the needle may be bent.

Product facts

Model Three Professional Kit: The Model Three Professional Kit features a longer capsule cup to accommodate the new, larger Coravin Pure Professional Capsules, which contain 30% more argon than standard capsules. You can pour more glasses per capsule, reducing how often you need to replace it during a tasting or dinner party.
Model Three Professional Kit